Drill Rig 5

Registration 1CFX 219

Rigs 5 is fitted with an air compressor producing 250psi @ 600cfm, and incorporates a dedicated engine for the hydraulics. All rigs are fitted on late model 4x 4 prime movers.

Note: These above figures are drawn from experience and are less than the theoretical limits.

DRILLBOSS 200 Capacity: BQ RAB 150m +
NQ Air Core 150m +
Boosted Light RC 150m
RIG TRUCK: MAN L-2000 4 X 4
Re-rated tare to
94,558 km @ 3rd Nov 2011
12,980 kg
18,000 kg
COMPRESSOR: Bostech modified COMP AIR:
Engine power:
600 cfm @ 250 psi
6CTA 8.3 Cummins 240hp @2000 rpm
HYDRAULICS: Engine Power:
Head Torque @ 150 rpm:
Max pull-down @ 2500 psi:
Max pull-back @ 2500 psi:
Head speed:
1004 / 4T Perkins
2226 ft-lb or 3030 Nm
5355 kg
7140 kg
Maximum 1.8 m/s down
Minimum 1.6 m/s up
MAST: Bostech Designed box section lattice construction mast
4” cylinder
Wire ropes 4 x 16mm
Eccentric adjustment for head plate, slide and dump slide
Max pressure rating
Max. Flow
XW Series Plunger pump
2200 psi
50 L/min
The Rig is fitted with: Water Tank – 600 litres
Fuel Tank – 600 litres
Water and / or foam injection
Hammer oiler
Cyclone and mounting system
Blow down / Blow back
Safety Equipment
Comprehensive First Aid Kit
Two serviced and in-date Fire extinguisher
Hand Tools
Safety shut-down buttons on sides and rear of Drill Rig