Rig 3 is fitted with an air compressor producing 250 psi @ 600cfm, and incorporates a dedicated engine for the hydraulics. All rigs are fitted on late model 4×4 prime movers. Rig 3 represents the pinnacle of drilling technology, combining raw power with exceptional versatility and mobility. It’s a true workhorse, ready to tackle any drilling challenge head-on.
| DRILLBOSS 200 | Capacity: | BQ RAB 150m + NQ Air Core 150m + Boosted Light RC 150m |
| RIG TRUCK: | ISUZU 700FTS Manufactured Re-rated tare to AGG | km 1990 12,980 kg 13,000 kg |
| COMPRESSOR: | Bostech modified COMP AIR: Engine power: | 600 cfm @ 250 psi 6 CTA 8.3 Cummins |
| HYDRAULICS: | Engine power: Head Torque @ 150 rpm: Max pull-down @ 2500 psi: Max pull-back @ 2500 psi: Head speed: | 1004 / 4T Perkins 2226 ft-lb or 3030 Nm 5355 kg 7140 kg Maximum 1.8 m/s down Minimum 1.6 m/s up |
| MAST: | Bostech Designed box section lattice construction mast 4” cylinder Wire ropes 4 x 16mm Eccentric adjustment for head plate, slide and dump slide | |
| WATER INJECTION PUMP | Annovi Reverberi AR-30C -30631 Max pressure rating 600 psi | |
| The Rig is fitted with: | Water Tank – 600 litres Fuel Tank – 600 litres Steyr transfer case Water and / or foam injection Hammer oiler Cyclone and mounting system Blow down / Blow back Comprehensive First Aid Kit Two serviced and in-date Fire extinguisher Hand Tools Safety shut-down buttons on sides and rear of Drill Rig Two-way communications – 40 Channel UHF Radio |
Unlock precision with our core drilling in Perth! Bostech Drilling Australia delivers unparalleled expertise for your drilling needs.