Rig 9 is fitted with an air compressor producing 250 psi @ 600 cfm, with the diesel engine powering both the compressor and hydraulics. All rigs are fitted on late model 4×4 prime movers.
| DRILLBOSS 300 | Capacity: | BQ RAB 150m + NQ Air Core 150m + Boosted Light RC 150m |
| RIG TRUCK: | MAN 330/26 6 X 6 Manufactured: Rated tare | 2010 16,200 kg |
| RIG POWER UNIT: | Deutz 1015 V8 DIESEL: | 443 HP @1500 RPM |
| COMPRESSOR: | ATLAS XRX 10: Max pull-down @ 3500 psi: Max pull-back @ 3500 psi: | 730 cfm @ 430 psi 6500 kg 8500 kg |
| HYDRAULICS: | Head Torque @ 150 rpm: Max pull-down @ 3500psi: Max pull-back @ 3500psi: Head speed: | 3335 ft.lb (4545Nm) 6500kg 8500kg Maximum 1.8m/s down Minimum 1.6m/s up |
| MAST: | Bostech Designed box section lattice construction mast 4” cylinder Wire ropes 4 x 16mm Eccentric adjustment for head plate, slide and dump slide | |
| The Rig is fitted with: | Water Tank – 600 litres Fuel Tank – 600 litres Water and / or foam injection Hammer oiler Cyclone and mounting system Blow down / Blow back Safety Equipment Comprehensive First Aid Kit Two serviced and in-date Fire extinguisher Hand Tools Safety shut-down buttons on sides and rear of Drill Rig Two-way communications – 40 Channel UHF Radio | |
| Rig fitted with articulated rod box: | Minimise manual labour content of tripping in and out the Drill Rods. By positioning the rods almost parallel to the mast inclination, the degree of lifting and balancing the pipe is greatly lessened. This Rig is designed to optimally manage a large number of 3m Rods with the least amount of risk of injury to personnel. |
Transforming challenges into opportunities, our concrete drilling services in Perth guarantee seamless execution. Experience the Bostech Drilling Australia advantage today!